Datasheet of M5 optical displacement Sensors (LASER, 10 kHz)
(fit to print)

M5L /		0.5	2	4	10	20	100	200	400
Range (mm)		± 0.25	± 1	± 2	± 5	± 10	± 50	± 100	± 200
Reference distance (mm)		2 (24)	24	24	45	65	220	340	680
Linearity error* (µm)		2	6	12	30	60	300	600	900
Resolution (Noise) (µm)		0.1	0.5	1	3	6	30	60	120
Spot diameter (mm)		0.1	0.2	0.3	0.6	0.9	1.5	2	4
Case drwg. (head + BOX )		C51	C52				C53		C54
Optional protective cases		N/A	integrated,scratch,heat				scratch,heat		scratch
Light source		LASER 1 mW, wavelength 675 nm (red)
Internal sample frequency		40 kHz							20 kHz
Safety		Laser Protection Class 2 (1 mW)
Analog  outputs	Voltage	± 10V, approx. ± 14V
	Impedance	< 0.1 Ohm (10 mA max.)
	Angle error	0.5%, tilted Object 30°, A-axis
	Reaction time	0.1 ms, 0.2 ms, 2 ms or 20 ms selectable							min .2
	Bandwidth (-3db)	10 kHz, 3 kHz, 250 Hz or 25 Hz							max 3k
	Temp. coeff.	0.03% / °K
	Reflected light	+1 to +10 VDC, approx. 0 to +13 VDC
Digital  outputs	MIN	+24 VDC / 10 mA, active if below MIN, yellow LED on
	OK	+24 V/10 mA, active if in-between MIN and MAX levels,grn. LED on
	MAX	+24 VDC / 10 mA, active if above MAX, red LED on
	Hysteresis	approx. 0.5% from range
Alarm  outputs	F1	+24 VDC / 10 mA, active if not enough refl. light, yellow LED on
	F2	+24 VDC / 10 mA, active if too much refl. light, red LED on
Optional outputs		Other Voltages, Current (4..20mA), Serial (RS232) , Relay , thickness
Ambient light		approx. 20,000 Lux
Life expectancy		50,000 h for LASER diode
Isolation voltage		200 VDC, ground to case
Maximum vibration		10g @ 1kHz (sensor head, 20g optional)
Operating temperature		0 to +50°C (32 to 122°F)
Storage temperature		-20 to +70°C (-4 to 158°F)
Humidity		< 90 % RH
Protection class		Sensor head IP 64 , Electronic module IP40
Power supply		+24 VDC, 200 mA (21 to 28 VDC)
Connector ( 25 pin D-Sub )		standard version, optional relay and serial versions
Sensor cable		2 m

Back

(*) Measuring on a white surface - Bandwidth set to 250 Hz

Home